Looking for a connector solution

This forum is for posts that might be considered off-topic but that may be useful or interesting to members. Examples include posts about electronics or programming in general, other microcontrollers or interesting devices, useful websites, etc.
Post Reply
victorf
Posts: 342
Joined: 01 January 2006, 4:08 AM
Location: Schenectady, New York

Looking for a connector solution

Post by victorf »

I want to interface the ZBasic USB-TTL Converter to a ZX-24. I am looking for a female, right-angle connector for the converter and a mating right-angle header for the project PCB. I want to easily attach or detach the converter to/from the PCB and I do not want to use any wires as I do now. Any suggestions?

Any enlightenment will be appreciated.

Vic
Vic Fraenckel
KC2GUI
windswaytoo ATSIGN gmail DOT com
Top
GTBecker
Posts: 616
Joined: 17 January 2006, 19:59 PM
Location: Cape Coral

Post by GTBecker »

Like this?

Image
Tom
Top
victorf
Posts: 342
Joined: 01 January 2006, 4:08 AM
Location: Schenectady, New York

Post by victorf »

Tom,

Thanks for the response.

If the gold males plug into the tin females and the spacing is 0.1" then that would get 'r' done.
:D


Who makes/sells and Part Number if possible!

Vic
Vic Fraenckel
KC2GUI
windswaytoo ATSIGN gmail DOT com
Top
GTBecker
Posts: 616
Joined: 17 January 2006, 19:59 PM
Location: Cape Coral

Post by GTBecker »

Digi-Key has many choices. Here's one: http://search.digikey.com/scripts/DkSea ... 1039-50-ND Mating connectors are listed at the bottom of that page.

Mouser and Newark also carry a number of these types of connectors.
Tom
Top
Post Reply

Return to “General”