Dual PCs to ZX circuit - viable?

Here you can share completed projects or parts of projects that may be useful to others. You may post files relevant to ZBasic - source code, schematics, etc.
Post Reply
stevech
Posts: 715
Joined: 22 February 2006, 20:56 PM

Dual PCs to ZX circuit - viable?

Post by stevech »

would this circuit permit two PCs' serial ports to share access to a ZX module?

By arrangement, the two PCs and the users would coordinate their access actions.
Attachments
dualPC to ZX
dualPC to ZX
DualPC to ZX.jpg (39.33 KiB) Viewed 11105 times
dkinzer
Site Admin
Posts: 3120
Joined: 03 September 2005, 13:53 PM
Location: Portland, OR

Post by dkinzer »

My conjecture is that it would work assuming, as you have suggested, that the PC will not be transmitting at the same time.

If you are using a ZX-24 or ZX-24a, you may need to add a resistor to ground (10K or so) on the receive input (pin 2) since the current design does not have a pulldown.
- Don Kinzer
Post Reply