Page 1 of 1
Missing ZBasic Registers from IDE
Posted: 28 November 2005, 11:51 AM
by mikep
The following two ZBasic registers are missing for auto-completion:
- Register.FaultType
Register.SignOn
These need to be added to the zbasic.api file.
Mike
http://home.austin.rr.com/perks/micros/
Posted: 28 November 2005, 13:25 PM
by dkinzer
Thanks for pointing that out. I've attached an updated zbasic.api file to a sticky post.
Posted: 29 November 2005, 22:53 PM
by mikep
I also have noticed that the bx constants such as bxPinLow are present but the zx equivalents (as documented for WaitforInterrupt etc) are not present in the zbasic.api file.
Mike
http://home.austin.rr.com/perks/micros/
Posted: 01 December 2005, 10:45 AM
by dkinzer
Thanks again. There is a new updated attachment to the sticky post in this forum.
Posted: 04 December 2005, 23:31 PM
by mikep
Continuing this thread, I also found Register.FaultData missing from ZBASIC.api.