ADC 10 or 12 Bit?

JC · Post by JC » 19 February 2006, 20:30 PM

I'm reviewing ZB-24 for an upcoming project. On home page, the ZB-24 info comparison table says ADC is 10 bits. ATmega summary says 10 bits. THe ZB Sys Lib ADC says 12 bits. Either is adequate for my project, but I wondered about the descrepancy. JC

mikep · Post by **mikep** » 19 February 2006, 20:38 PM

This was answered in another thread viewtopic.php?t=188.

There is a typo in the documentation. ZBasic supports 10 bit ADC.

JC · Post by JC » 19 February 2006, 21:42 PM

Thank you for the prompt reply. I missed it on the other forum. JC