I have an application where I want to replace the serial interface on the XTB-232 with the ESP8266.
http://jvde.us/xtb_232.htm
It needs to connect to the XTB-232 PIC UART at 4800bps and merely needs to relay comms traffic to/from WiFi.
Would anybody have relevant ZBasic for ESP8266 code?
ESP8266 as simple WiFi-Serial adapter
ok, not a zbasic solution, but it works perfect as TCP2RS232 bridge ...
http://domoticx.com/esp8266-wifi-univer ... -firmware/
Gerry
http://domoticx.com/esp8266-wifi-univer ... -firmware/
Gerry
Thank you! I had already found https://github.com/beckdac/ESP8266-transparent-bridge but this looks much better.
I need to study it but hope I can use this https://www.hw-group.com//products/hw_vsp/index_en.html virtual WiFi serial port with it.
I need to study it but hope I can use this https://www.hw-group.com//products/hw_vsp/index_en.html virtual WiFi serial port with it.
The author also has an active thread on the ESP8266 Community Forum.GKCS wrote:ok, not a zbasic solution, but it works perfect as TCP2RS232 bridge ...
http://domoticx.com/esp8266-wifi-univer ... -firmware/
Gerry
http://www.esp8266.com/viewtopic.php?f=6&t=3959
This drags things off topic but I found a different solution. See USR-C215...
https://www.usriot.com/products/iot-wifi-module.html
https://www.usriot.com/products/iot-wifi-module.html